Silca
Silca Ultimate Chain Waxing System
Overview
The Silca Ultimate Chain Wax System, when used in conjunction with Silca’s own Secret Chain Blend Hot Wax and StripChip Hot Melt Chain Degreaser, will allow you to degrease and wax a new bike chain with no prep and minimal effort.
Key Features
- System includes:
- Chain coupler
- Chain Hanging Stand
- Wax Melter
- Wax Melter pot capacity is 600ml
- Temperature range is 75-125°C
- Designed exclusively for the waxing of bicycle chains, not to be used for other purposes
- Voltage 110-240V/50-60Hz, power consumption 100W
- UK plug
- Read all instructions before using
- Allow to cool before handling, cleaning or storing
- No need to clean pot after each use, simply remelt leftover wax and use again
- To clean, use cotton or paper towels to wipe clean while unplugged but still warm
Product information
You have 30 days to return your item from when it reaches you
If you wish to return a product under warranty, please see our Saddleback Warranty Information page for more information.
- Free standard delivery (3-5 working days) on orders over £45.
- Standard delivery (3-5 working days) on orders under £45 - £2.99
- Express delivery (1-2 working days) £4.99
For more information on delivery times and prices click here.
Holiday dates
Last order date for holiday despatch 20th December at 12:00.
Company closes 24 December at 17:00.
Company reopens 2 January at 08:30.
We will endeavour to deliver orders during the holiday period, however due to demand during this busy period, orders placed between the 23rd and 31st December will likely ship in the New Year.
The Silca Ultimate Chain Wax System, when used in conjunction with Silca’s own Secret Chain Blend Hot Wax and StripChip Hot Melt Chain Degreaser, will allow you to degrease and wax a new bike chain with no prep and minimal effort.
It consists of a Chain Coupler adjoined to a Chain Hanging Stand, plus a Wax Melter. The Wax Melter is positioned within the stand, then filled with 300g of Secret Chain Blend Hot Wax, leaving 20mm at the top of the pot.
If degreasing and waxing together:
Push the temperature beyond its automatic 75°C to 125°C, then once the wax starts to melt, break off one piece of StripChip and place it on top of the wax.
Allow the wax and Hot Melt Chain Degreaser to fully melt, so that the StripChip is no longer visible, then use a cable coupler to lower your chain into the mixture, threading it through five to six links of the chain, spread out to allow a good number of links between each of these. Gently agitate it for 30 seconds, being sure not to spray wax outside the Wax Melter, then let it sit for 10 minutes.
Finally, agitate the chain for another 30 seconds, then lower the temperature of the machine back down to 75°C. Once it reaches that temperature, which should take around 10 minutes, it will be safe to use the cable coupler to remove the chain and hang it to dry on a waxing stand, before turning the Wax Melter off. Allow to cool for 10-15 minutes before handling or installing on your bike.
Please note, it’s easier if you articulate each link before installing, to break down the wax, and it may take 10-20 minutes of pedalling to break in the new chain.
If degreasing and waxing without StripChip:
Degreasing without StripChip requires an extra step and a bottle of Silca’s Ultimate Chain Stripper + Wax Prep. Two options are possible, you can add the Ultimate Chain Stripper to an Ultra-Sonic cleaner for best results or simply find a glass jar with a tight-fitting lid, pour in 29ml of the solution, submerge the chain and shake.
Next, leave to soak for 10 minutes, to allow the solution to penetrate every part of the chain, then agitate again. Pour out the stripper, rinse and agitate in water, then repeat the rinsing process twice more. Finally, remove the chain and dry thoroughly with a microfibre towel before waxing.
Waxing the chain without StripChip
Spread the chain out on the cable coupler, again looping through five or six links and letting the spare chain hang. Lower the chain into the molten wax, which will have melted at the standard 75°C. Allow a portion of the coupler to remain above the surface, though, for easy retrieval.
Agitate the chain in the wax, using the cable coupler, until no more bubbles from trapped air appear, at which point the wax should have fully penetrated between the rollers and pins of the chain. Now, slowly raise the chain and hang it from the drip stand by the cable coupler, to drip into the pot. Again, allow to cool for 10-15 minutes before handling or installing on your bike.
Please note, it’s easier if you articulate each link before installing, to break down the wax, and it may take 10-20 minutes of pedalling to break in the new chain.
Quick link
If your chain has a quick link, this is not suitable for immersion in Hot Melt Wax. If desired, instead apply Silca Super Secret Wax Lube Chain Coating after you have installed the newly waxed chain. Be sure to allow a few hours’ drying time before use after applying on the rollers and pins, though.
Please follow manufacturer’s instructions for quick link usage with your chain.
More Information
Delivery
- Free Standard Delivery (3-5 working days) on orders over £45
- Standard delivery (3-5 working days) on orders under £45. - £2.99.
- Express delivery (1-2 working days) - £4.99
For more information on delivery times and prices click here.
Returns
Returning a product is free and easy using our Returns Portal, which allows you to send your product back to us by dropping off your return items at any one of over 7,400 CollectPlus locations around the UK.
You have 30 days to return your item from when it reaches you.
For more information on returning items click here.
About Silca
Few brands have been more intimately connected to the last 100 years of cycling than Silca. The Italian-born brand's legacy of legendary quality has seen company's pumps being passed down through generations of professional mechanics and cycling enthusiasts - riders who value the experience of bike maintenance and understand its performance value. Now based in the US, Silca's heirloom quality pumps have been joined by a growing selection of thoughtfully designed tools and stylish accessories.
About Saddleback
Founded by real cycling enthusiasts in 2004, our passion for elite performance runs through everything we do at Saddleback. Our team of dedicated roadies, mountain bikers and triathletes practice what we preach to bring you the finest cycling products and a superior service to match. We're the official UK home of Abbey Bike Tools, Castelli, Chris King, ENVE, HJC, Moots Cycles, Pivot Cycles, PUSH, Sidi, Silca, Sportful, Stages, Troy Lee Designs and Wolf Tooth.
Warranty and Crash Replacement
In addition to our regular 100-day returns policy on unused items, all items purchased from www.saddleback.co.uk are covered by our full two-year warranty against manufacturing defects from date of purchase. We will exchange, refund or repair (at our discretion) items proven to exhibit manufacturing or material faults in line with fair wear and tear.