PRODUCT DETAILS
The Troy Lee Designs T-Bone Knee Guards are super lightweight and easy to wear protection.
A triple layer of stacked protection (EVA, TPR and memory foam) works together offering protection far superior to the weight of the product.
T-Bones from TLD will protect your knees when you run out of talent, and give you the confidence to ride at a higher level.
Key Features
- Molded EVA outer shell with ballistic nylon cover
- Knee cup consists of a combination stack of EVA, TPR and memory foam
- Ergonomically contoured with 2 elastic Velcro closures and internal silicone grippers
- Lightweight and low profile
- 1x Pair
- CE certified to EN13688:2013
Fitting instructions TLD T-Bone Knee Guards
Take measurements 10 cm above the knee CENTER for Lower Thigh measurement and 15 cm below knee CENTER for Calf measurement. Measurements should fall into one of the following size categories:
T-Bone Knee Guard Size | XS/S | M/L | XL/XXL |
Lower Thigh (inch) | 15-17" | 16.5-18.5" | 18-21" |
Calf (inch) | 13-14.5" | 14.5-17" | 15-18" |
Rider Weight (lbs) | 70-140 | 140-180 | 180-220 |
Rider Weight (kg) | 32-63 | 63-82 | 82-100 |
The knee pad should not be loose in any area. Make sure there are no gaps between pad and leg, and the openings are snug. The kneepad foam padding shall be placed directly over the kneecap
Cleaning Instructions
Hand wash cold only. Do not dry clean or bleach. Drip dry. Do not clean your protective gear with anything but soap and water. Do not use any abrasive cleaners or pads. Do not use hot water or chemical cleaners or any solvents which contain petroleum-based products like benzene or gasoline on your protective gear. Your protective gear can be weakened by these substances and may not provide its intended protection in an accident, which can result in serious injury or death. Do not use hair dryers or heaters to dry your protective gear.
ABOUT Troy Lee Designs
Troy Lee Designs is one of the biggest and most recognisable names in mountain biking with very good reason. The brand's inimitable style, cultivated by founder and artist Troy Lee, has given the sport a visual identity, reflected its attitude and re-shaped the MTB landscape time and again over the last 25 years. With an ever-growing range of artful apparel and high-performance protection, Troy Lee Designs remains the benchmark against which all other off-road brands are measured. Read more about Troy Lee Designs.
ABOUT SADDLEBACK
Founded by real cycling enthusiasts in 2004, our passion for elite performance runs through everything we do at Saddleback. Our team of dedicated roadies, mountain bikers and triathletes practice what we preach to bring you the finest cycling products and a superior service to match. We're the official UK home of Abbey Bike Tools, Castelli, Chris King, ENVE, HJC, Moots Cycles, Pivot Cycles, PUSH, Sidi, Silca, Sportful, Stages, Troy Lee Designs and Wolf Tooth.